Setting Site-Specific Option Number; Setting The Group Identifier - Avaya 9600 Series Installing And Administering

Setting Site-Specific Option Number

About this task
Caution:
Do not perform this procedure if you are using static addressing. Perform this procedure only
if you are using DHCP and the LAN administrator instructs you to do this. Use the following
procedure to set the Site-Specific Option Number (SSON).
Procedure
1. Use the Craft password to gain access to the Administration procedures screen. The
default password is 27238.
2. When you select SSON from the Administration procedures screen, the following text
displays:
Setting
where the setting is the current system value of DHCP_SSON.
3. To change the setting, press the appropriate softkey(s) and use the dialpad to enter a valid
SSON value between 128 and 254.
4. Press Save to store the new setting and return to the Administration procedures screen.

Setting the Group identifier

About this task
Use the following procedure to set or change the Group Identifier. You can set the group values
from the System Manager and Communication Manager via Personal Profile Manager (PPM).
Note:
Perform this procedure only if the LAN Administrator instructs you to do so.
Procedure
1. Use the Craft password to gain access to the Administration procedures screen. The
default password is 27238.
2. Select GROUP from the Administration procedures screen.
3. Enter a valid Group value (0-999).
Any changes that you make to the Group value results in the restart of the deskphone
when you exit the Administration menu.
4. Press Save to store the new setting.
January 2020 Installing and Administering Avaya 9601/9608/9611G/9621G/9641G/9641GS IP
Deskphones SIP
Comments on this document? infodev@avaya.com
Setting Site-Specific Option Number
71