Avaya 9600 Series Installing And Administering page 25

Parameter
HTTPPORT
HTTPSRVR
ICMPDU
ICMPRED
L2Q
L2QVLAN
PHY1STAT
PHY2STAT
PROCPSWD
PROCSTAT
REUSETIME
SIG
SIP_CONTROL
LER_LIST
TLSDIR
TLSPORT
TLSSRVR
January 2020 Installing and Administering Avaya 9601/9608/9611G/9621G/9641G/9641GS IP
Description
Sets the TCP port used for HTTP file downloads from non-Avaya servers. The default is
80.
IP addresses or DNS names of HTTP file servers used for downloading settings,
language, and firmware files during startup.
The firmware files are digitally signed, so TLS is not required for security.
Controls the extent to which ICMP Destination Unreachable messages are sent in
response to messages sent to closed ports so as not to reveal information to potential
hackers. The default is 1, that is sends Destination Unreachable messages for closed
ports used by traceroute.
Controls whether ICMP Redirect messages are processed. The default is 0, that is,
redirect messages are not processed.
802.1Q tagging mode. The default is 0 for automatic.
VLAN ID of the voice VLAN. The default is 0.
Specifies the speed and duplex settings for the Ethernet line interface. The default value
is 1 for auto-negotiate.
Specifies the speed and duplex settings for the secondary (PC) Ethernet interface. The
default value is 1.
Security string used to access local procedures.
The default is 27238. ADMIN_PASSWORD replaces this parameter if
ADMIN_PASSWORD is set in the 46xxsettings.txt file.
Controls whether local (Admin menu) procedures can be used to configure the phone.
Time in seconds for IP address reuse timeout, in seconds. The default is 60 seconds.
The signaling protocol download flag that indicates the protocol applied as follows:
• 0 for Default
• 1 for H.323
• 2 for SIP
SIP proxy or registrar server IP or DNS addresses that can be 0 to 255 characters, IP
address in the dotted decimal name format, separated by commas and without any
intervening spaces. The default is null, that is, no controllers.
Used as path name that is prepended to all file names used in HTTPS GET operations
during initialization. The string length can be from 0 to 127.
Destination TCP port used for requests to https server in the range of 0 to 65535. The
default is 443, the standard HTTPS port.
IP addresses or DNS names of Avaya file servers used to download configuration files.
Firmware files can also be downloaded using HTTPS.
Note:
Transport Layer Security is used to authenticate the server.
Comments on this document? infodev@avaya.com
Deskphones SIP
Configuration through DHCP
Table continues...
25