Avaya 9600 Series Installing And Administering page 238

List of configuration parameters
Parameter name
RTP_PORT_LOW
RTP_PORT_RANGE
S
SCEPPASSWORD
January 2020 Installing and Administering Avaya 9601/9608/9611G/9621G/9641G/9641GS IP
Default
value
5,004
40
$SERIALNO Specifies the password to be
Deskphones SIP
Comments on this document? infodev@avaya.com
Description
Specifies the lower limit of the UDP
port range to be used by RTP or
RTCP and SRTP or SRTCP
connections.
The values can range from 1024
through 65503.
Specifies the range or number of
UDP ports available for RTP or
RTCP and SRTP or SRTCP
connections
This value is added to
RTP_PORT_LOW to determine the
upper limit of the UDP port range.
The values can range from 32
through 64511.
included in the change password
attribute of an SCEP certificate
request.
Values can contain 0 to 32 ASCII
characters (50 ASCII characters.
If the value contains $SERIALNO, it
is replaced by the phone's serial
number. If the value contains
$MACADDR, it is replaced by the
phone's MAC address in hex.
Note:
• A password prompt is
invoked when SCEP is set for
identity certificate enrollment
and the parameter value is
empty.
• This parameter must not be
set in a file that is accessible
on an enterprise network,
and only in a restricted
staging configuration.
Table continues...
238