Avaya 9600 Series Installing And Administering page 245

Parameter name
SIP_CONTROLLER_LIST_2
SIP_PORT_SECURE
January 2020 Installing and Administering Avaya 9601/9608/9611G/9621G/9641G/9641GS IP
Default
value
Null
5061
Deskphones SIP
Comments on this document? infodev@avaya.com
Description
This parameter replaces
SIP_CONTROLLER_LIST for dual
mode phones. It contains the list of
SIP Proxy or Registrar servers
separated by comma when the SIP
device is configured for the dual-
stack operation.
SIP_CONTROLLER_LIST_2 is used
on IPv6-only phones to provide the
list of SIPv6 servers. SIPv4 servers
are ignored in IPv6-only mode.
Valid values are 0 to 255 characters
in the dotted decimal or colon-hex
format.
The SIP Proxy list has the following
format: host[:port]
[;transport=xxx] where
• host is IP addresses in dotted-
decimal format or hex format.
• [:port] is the port number. The
default values are 5060 for TCP
and 5061 for TLS.
• [;transport=xxx] is the
transport type and xxx is either
TLS or TCP. The default value is
TLS.
For example,
SIP_CONTROLLER_LIST_2="10.1
6.26.88:5060;transport=tcp"
Specifies the destination TCP port
for SIP messages sent over TLS.
Valid values are 1024 through
65535. The default value is 5061.
The parameter is used in non-Avaya
environment. In Avaya environment,
this parameter is overwritten by
PPM configuration.
Table continues...
245