Avaya 9600 Series Installing And Administering page 198

List of configuration parameters
Parameter name
FORCE_WEB_ADMIN_PASSWORD
FQDN_IP_MAP
G
G726_PAYLOAD_TYPE
GMTOFFSET
January 2020 Installing and Administering Avaya 9601/9608/9611G/9621G/9641G/9641GS IP
Default
value
Null
Null
110
0:00
Deskphones SIP
Comments on this document? infodev@avaya.com
Description
Specifies the password to access
the phone through Web as
Administrator.
Valid values are 8 to 31
alphanumeric characters.
Specifies a comma separated list of
name or value pairs where the name
is an FQDN and the value is an IP
address. The IP address may be
IPv6 or IPv4 but the value can only
contain one IP address. String
length is up to 255 characters
without any intervening spaces
inside the string. The purpose of this
parameter is to support cases where
the server certificate Subject
Common Name of Subject
Alternative Names includes FQDN,
instead of IP address, and the
SIP_CONTROLLER_LIST is defined
using IP address. This parameter is
supported with phone service
running over TLS, however, the
main use case is for Avaya Aura
SM/PPM services. This parameter
must not to be used as an
alternative to a DNS lookup or
reverse DNS lookup.
Specifies the RTP payload type to
be used for the G.726 codec.
Valid values are 96 through 127.
Specifies the time offset from GMT
in hours and minutes.
The format begins with an optional +
or - (+ is assumed if omitted),
followed by 0 through 12 (hours),
followed by a colon (:), followed by
00 through 59 (minutes).
Table continues...
198