Avaya 9600 Series Installing And Administering page 96

Phone administration
PC Ethernet: Choice Selector
The values shown are the text strings associated with the current PHY1STAT on the
Ethernet line and the current PHY2STAT system value on the PC Ethernet line. The
PHY1STAT text strings are:
• "Auto" when PHY1STAT = 1
• "10Mbps half" when PHY1STAT = 2
• "10Mbps full" when PHY1STAT = 3
• "100Mbps half" when PHY1STAT = 4
• "100Mbps full" when PHY1STAT = 5
• "1000Mbps full" when PHY1STAT = 6
Note:
A PHY1STAT value of 6 applies only to deskphone models that support Gigabit
Ethernet (GigE), otherwise this value/choice does not display.
The PHY2STAT text strings are:
• "Disabled" when PHY2STAT = 0
• "Auto" when PHY2STAT = 1
• "10Mbps half" when PHY2STAT = 2
• "10Mbps full" when PHY2STAT = 3
• "100Mbps half" when PHY2STAT = 4
• "100Mbps full" when PHY2STAT = 5
• "1000Mbps full" when PHY2STAT = 6
Note:
A PHY2STAT value of 6 applies only to deskphone models that support Gigabit
Ethernet (GigE), otherwise this value/choice does not display.
3. To change the Ethernet setting, press the Right navigation arrow or the Change softkey to
cycle through the possible settings.
Depending on the current value, the next sequential text string is selected and displayed
as the setting. For example, if the current value is 10 Mbps half (2), pressing the Right
navigation arrow changes the value to 10 Mbps full (3). If the current value is 1000 Mbps
full (6), pressing the Right navigation arrow changes the value to Auto (1).
4. To change the PC Ethernet setting, select that line and press the Right navigation arrow or
Change to cycle through the possible settings.
5. Press Save to store the new setting(s) and redisplay the Admin Procedures screen.
January 2020 Installing and Administering Avaya 9601/9608/9611G/9621G/9641G/9641GS IP
Deskphones SIP
Comments on this document? infodev@avaya.com
96