View Field Description - Avaya 9600 Series Installing And Administering

About this task
Note:
Unless otherwise prevented using administration, the user can view but not change most of
the parameters associated with Craft Local Procedures. For more information about this
option, see the applicable user guide(s). If the View Network Information option is not
available due to being disabled by administration, use the ADDR option to view IP Addresses.
The IP Addresses might have been entered incorrectly. Verify whether you were provided with
correct IP Addresses.
Procedure
1. Use the Craft password to gain access to the Administration procedures screen. The
default password is 27238.
2. Select VIEW from the Administration procedures screen. See View field descriptions for
more details.
3. Press Back at any time to return to the Administration procedures screen.

VIEW field description

Setting
Model
Application File
Boot File
Button modules
FIPS
Protocol
Group
MAC
SIP Proxy Server
January 2020 Installing and Administering Avaya 9601/9608/9611G/9621G/9641G/9641GS IP
Description
The model of the phone that is
set by factory procedures.
The name of the Signed
Application/Library software
package.
The name of the boot file.
The connected button module to
the phone. Button module is
supported only in Avaya J169/
J179 IP Phone.
The FIPS mode is displayed.
Signaling protocol in effect, such
as SIP.
The group identifier to download
during start-up a specific
configuration set for a dedicated
user group.
The MAC address of the phone.
The SIP proxy server to which the
phone registered successfully.
Deskphones SIP
Comments on this document? infodev@avaya.com
VIEW field description
Associated Configuration
Parameter
MODEL
FIPS_ENABLED
GROUP
MACADDR
SIPPROXYSRVR_IN_ USE
Table continues...
73