Avaya 9600 Series Installing And Administering page 200

List of configuration parameters
Parameter name
HEADSET_PROFILE_DEFAULT
HEADSET_PROFILE_NAMES
HEADSYS
January 2020 Installing and Administering Avaya 9601/9608/9611G/9621G/9641G/9641GS IP
Default
value
1
Null
0
Deskphones SIP
Comments on this document? infodev@avaya.com
Description
Specifies the number of the default
headset audio profile.
Valid values are 1 through 20.
Note:
Avaya J129 IP Phonedoes not
support this feature.
Specifies an ordered list of names to
be displayed for headset audio
profile selection.
The list can contain 0 to 255 UTF-8
characters.
Names are separated by commas
without any intervening spaces. Two
commas in succession indicate a
null name, which means that the
default name is displayed for the
corresponding profile. Names can
contain spaces, but if any do, the
entire list must be quoted. There is
no way to prevent a profile from
being displayed.
Note:
Avaya J129 IP Phonedoes not
support this feature.
Specifies whether the phone goes
on-hook if the headset is active
when the disconnect message is
received.
Value operation:
• 0: The phone goes on-hook if the
disconnect message is received
when the headset is active.
• 1: Disconnect messages are
ignored when the headset is
active. This is used for Call Center
setting.
Table continues...
200