Avaya 9600 Series Installing And Administering page 181

Parameter name
DOT1X
DOT1XEAPS
DOT1XSTAT
DSCPAUD
DSCPAUD_FL
January 2020 Installing and Administering Avaya 9601/9608/9611G/9621G/9641G/9641GS IP
Default
value
0
MD5
0
46
43
Deskphones SIP
Comments on this document? infodev@avaya.com
Description
Specifies the 802.1X pass-through
operating mode.
Pass-through is the forwarding of
EAPOL frames between the phone's
ethernet line interface and its
secondary (PC) ethernet interface
Value operation:
• 0: EAPOL multicast pass-through
enabled without proxy logoff.
• 1: EAPOL multicast pass-through
enabled with proxy logoff.
• 2: EAPOL multicast pass-through
disabled.
Specifies the authentication method
to be used by 802.1X.
Valid values are MD5, and TLS.
Specifies the 802.1X supplicant
operating mode.
Value operation:
• 0: Supplicant disabled.
• 1: Supplicant enabled, but
responds only to received unicast
EAPOL messages.
• 2: Supplicant enabled; responds
to received unicast and multicast
EAPOL messages.
Specifies the layer 3 Differentiated
Services (DiffServ) Code Point for
audio frames generated by the
phone.
Valid values are from 0 to 63.
This parameter can also be set
through the LLDP, which overwrites
any value in the settings file.
Specifies the DSCP value for flash
precedence or priority level voice
call.
Valid values are from 0 to 63.
Table continues...
181