Chapter 3: Initial setup and connectivity
Hardware and software prerequisites
Check the prerequisites to ensure that you have the required software and hardware before you
install the 9600 Series IP Deskphones.
Hardware prerequisites
Ensure that the LAN:
• Uses Ethernet Cat. 5e or Cat. 6 cabling
• Has either of the following specifications:
- 802.3af PoE
- 802.3af PoE injector
Software prerequisites
Ensure that your network already has the following components installed and configured:
®
• Avaya Aura
®
• Avaya Aura
®
• Avaya Aura
• If applicable, Avaya Aura
• If applicable, Avaya Aura
• If applicable, IP Office IPO 11.0.0 or later
• A DHCP server for providing dynamic IP addresses to the .
• A file server, an HTTP, HTTPS, or the Avaya Aura
software distribution package and the settings file
IPv6 deployment requires Avaya Aura
Communication Manager v7.1 or later, Avaya Aura
®
Aura
Session Border Controller v7.1 or later. For more information about installing and
configuring the components, see their respective documentation.
January 2020
Installing and Administering Avaya 9601/9608/9611G/9621G/9641G/9641GS IP
Session Manager 6.3.8 or later
Communication Manager 6.3.6 or later
System Manager 6.3.8 or later
®
Presence Services 6.2.4 or later
®
Session Border Controller 7.0 or later
®
Session Manager v7.1 or later, Avaya Aura
Comments on this document? infodev@avaya.com
®
Utility Services for downloading the
®
System Manager v7.1 or later, and Avaya
Deskphones SIP
®
15