Avaya 9600 Series Installing And Administering page 262

List of configuration parameters
Parameter name
WEB_ADMIN_PASSWORD
WEB_HTTP_PORT
WEB_HTTPS_PORT
WEBSERVER_ON_HTTP
WLAN_MAX_AUTH_FAIL_RETRIES
January 2020 Installing and Administering Avaya 9601/9608/9611G/9621G/9641G/9641GS IP
Default
value
27238
80
443
0
3
Deskphones SIP
Comments on this document? infodev@avaya.com
Description
Specifies the password to access
the phone through a web browser as
an administrator.
The value set from the web server
interface has a higher priority than
that of the Settings file.
If the Web admin password is
changed using the web server, then
the web admin password set
through settings file is not used until
either the web admin password is
set to default through the phone
admin menu or the phone is reset to
default.
Valid values are from 8 to 31
alphanumeric characters including
upper, lower and special characters.
Specifies the port on which the Web
Server running on the phone will be
accessed using HTTP.
Valid values are 0, 80, 1024 to
65535.
Specifies the port on which the Web
Server running on the phone will be
accessed using HTTPS.
Valid values are 443, 1024 to 65535.
Specifies whether HTTP access to
the web server is enabled or
disabled.
Value operation:
• 0: Web Server is not accessible
through HTTP.
• 1: Web Server is accessible
through HTTP.
Specifies the number of times the
phone will retry a secure connection
upon receiving (possibly successive)
auth failures.
The valid values range from 0 to 4.
Table continues...
262