Table of Contents
Advertisement
S
ERVICE
Restoring and verifying functionality after service
Before you leave the customer site, make sure that you complete the following steps. If you
cannot complete a step, determine the reason and correct the problem before continuing. For
more information, see
T
O REASSEMBLE THE
1. Reseat all boards, cables, connectors, and other parts loosened or removed during service.
When routing cables inside the E-8100, make sure that:
• Cables are securely installed after routing cables.
• Cable routing does not interfere with the operation of internal components nor interfere
with removing or replacing components.
• Cables are not tangled nor looped around internal circuit boards, or components
(such as capacitors and resistors).
• Cables do not lie on or against any internal heating element.
• Cables do not interfere with opening or closing E-8100 panels.
• Cable slack is secured with a tie-wrap.
2. Restore the E-8100 to the upright position.
3. Replace any panels that you removed earlier, as described on
4. If you replaced the motherboard, make sure that the new motherboard solves the problem
that you are troubleshooting, and then update the system (see
5. If the E-8100 is to be mounted on the optional furniture with the optional monitor, see the
reassembly instructions on
6. Connect the power cable to the E-8100 (see
7. Connect the E-8100 to the copier (see
8. Print the Test Page and Configuration page (see
• If the E-8100 does not start up, refer to the startup problems listed on
• If pages do not print, verify that the interface cables are properly connected (see printing
problems on
• If image quality is poor, test the copier. (See the service documentation that accompanies
the copier.)
9. Connect to the network (see
10. Ask the network administrator to download a test job over the network.
If the job does not print or has poor image quality, see printing problems in
error messages and conditions"
documentation located on the User Documentation CD.
P
ROCEDURES
Troubleshooting
E-8100
AND VERIFY FUNCTIONALITY
page
145.
page
135).
page
28).
on page 126 and the Troubleshooting sections of the user
on
page
115.
page
page
page
28).
page
28).
page
37).
99
48.
70).
page
126.
"Table 3: E-8100
Advertisement
Table of Contents
