Table of Contents
Advertisement
S
P
ERVICE
ROCEDURES
6. Remove the switch bank assembly from the Component Sled.
• Remove the three screws that attach the switch bank assembly to the Component Sled.
• Pull the switch bank assembly straight out of the Component Sled.
Removing/replacing the switch bank assembly
F
35:
IGURE
N
:
Guide the cables as you remove the assembly from the Component Sled. Be careful not
OTE
to damage the EMI gasket around the opening in the Component Sled.
7. If you are removing the switch bank assembly to replace it with a new assembly, remove the
DVD drive (see
page
97).
Component Sled
Screw (1 of 3)
Switch bank assembly
94
Advertisement
Table of Contents
