Table of Contents
Advertisement
I
NSTALLATION
Mac OS
PC
computers
computers
Check installation
requirements and verify
site conditions.
If possible, obtain
verification that the
network is operational
(see
page
24).
Copier
Networked computers
F
IGURE
UNIX
workstations
Prepare the copier for connection to the E-8100 (see
• Install the Gigabit Ethernet board in the copier.
• Install the "fierydriven®" key top on the copier.
• Change the SP mode on the copier (see
• Affix the Fiery decal to the copier front cover.
Connect interface cables (see
• Connect the interface cable to the upper RJ-45
port on the E-8100 and the Gigabit Ethernet
connector on the copier.
• Network cable to the lower RJ-45 port.
Complete installation (see
Remind the site administrator to install the current
user software on networked computers that print to the
E-8100 (see Printing from Windows, Printing from Mac OS,
and Utilities on the User Documentation CD).
Summary of installation steps and references
3:
E-8100
Power cable(s), customer kit, media pack,
optional monitor, keyboard, and mouse
Unpack the E-8100 (see
If present, connect the optional monitor,
keyboard, and mouse to the E-8100
(see
page
28).
If you must change the E-8100 language,
reinstall system and user software using the
system software DVDs (see
page
29):
page
31).
Full E-8100 functionality
page
26).
page
100).
page
142):
page
143).
23
Advertisement
Table of Contents
