Figure 24: Cpu Cooling Assembly - Fiery E-8100 Installation And Service Manual

S
Motherboard CPU
The CPU is installed in a socket on the motherboard. Before you remove the CPU from its
socket, remove the motherboard from the chassis (see
from the motherboard, and then remove the cooling assembly from the E-8100 (see
The CPU cooling assembly consists of a fan and a heatsink.
N
OTE
CPU fan
Fastener
(1 of 4)
Peg
(1 of 4)
Heatsink
CPU
Load plate open
Yellow triangle
F
IGURE
If you remove the CPU from the motherboard in order to install it on a new motherboard,
unpack the new motherboard and remove the protective plastic cover on the CPU socket.
Transfer the protective cover to the CPU socket of the old motherboard to protect the
circuitry. Follow standard ESD precautions while handling the motherboard and all
components.
P
ERVICE ROCEDURES
: Do not remove the CPU fan from the heatsink.
CPU cooling assembly
24:
page 58), disconnect the CPU fan cable
Fan cable
Yellow triangle
CPU socket
Socket lever in the open position
75
page 76).