I
22
NSTALLATION
I
NSTALLATION
This chapter includes information about the following:
• Checking the customer site
• Unpacking the E-8100
• Installing the E-8100 and connecting it to the copier and network
• Printing a E-8100 Test Page and Configuration page
• Completing the installation
Installation sequence
Familiarize yourself with this chapter before you attempt an installation. The installation
sequence described in this chapter is designed to make your job as easy as possible. Installation
problems are easier to avoid and diagnose if you proceed from the component to the system
level and verify functionality at each stage.
Figure 3
on page 23 outlines the recommended
installation procedure for connecting the E-8100 to the copier.
Because the E-8100 is a node on the customer's computer network, make sure that you
coordinate your scheduled installation with the network administrator at the customer site.
For Network Setup information, refer the network administrator to Configuration and Setup
on the User Documentation CD.
Changing the pre-installed E-8100 language
If you need to change the default language pre-installed at the factory, you must reinstall
system and user software using the system software DVDs. For details, see
"System and User
software"
on page 100.