Figure 26: Inspecting The Cooling Assembly Pins On The Underside Of The Motherboard - Fiery E-8100 Installation And Service Manual

S P
ERVICE ROCEDURES
4. Turn the motherboard over and verify that the black pins protrude through the mounting
holes on the underside of the motherboard.
Inspecting the cooling assembly pins on the underside of the motherboard
F 26:
IGURE
5. Connect the CPU fan cable to the motherboard connector FAN 1.
If you are installing a new CPU, secure slack in the fan cable using a tie-wrap. The tie-wrap
prevents the fan cable from interfering with the CPU fan. Also, make sure that the connector
on the cable is securely connected to the motherboard.
6. Reassemble the E-8100 and verify its functionality (see page 99).
79