Precautions - Fiery E-8100 Installation And Service Manual

Color controller
Table of Contents

Advertisement

P
REFACE

Precautions

Always observe the following general precautions when installing and servicing the E-8100:
• Avoid pressing the surface of the LCD.
Applying excessive pressure to the LCD window will cause it to change color.
• Use a soft cloth moistened with Lens and Mirror Cleaner to clean the surface of the E-8100
display window.
Other solvents, such as water, may damage the polarizer on the display window.
WARNING: Never lift the E-8100 by grasping the top panel. The top panel does not support
the weight of the system.
ATTENTION:
AVVERTENZA:
può sostenere il peso dell'intero sistema.
WARNUNG:
ausgelegt, das Gesamtgewicht des Systems zu tragen.
DVERTENCIA:
del sistema.
ADVERTÊNCIA:
WAARSCHUWING:
systeem niet dragen.
• When connecting or disconnecting the power cord:
– Only use the power cord that shipped with the E-8100 or an appropriate replacement
power cord available from an authorized provider.
– Always disconnect the power cord from the E-8100 back panel before opening the unit and
servicing internal components.
– Do not pull on the power cord when unplugging the E-8100. Pull the plug instead.
– Do not place objects on the power cord. Place the power cord away from foot traffic.
– Do not tamper with or disable the power cord grounding plug.
– Do not use a 3-prong adapter in a 2-hole ungrounded outlet.
– Do not use an extension cord.
– Do not plug the E-8100 into a circuit with heating or refrigeration equipment (including
water dispensers).
– Do not plug the E-8100 into a switchable power outlet. This can result in the E-8100 being
turned off accidentally.
• Never set any liquid on or near the E-8100 or copier. If liquid is spilled into the E-8100 or
copier, disconnect the power cord immediately.
• Do not attempt to open the power supply, DVD drive, or hard disc drive (HDD).
Ne jamais soulever le serveur d'impression par sa partie supérieure : celle-ci ne peut pas supporter le poids du système.
Il server di stampa non deve essere mai sollevato afferrandolo dal pannello superiore, in quanto quest'ultimo non
Heben Sie den Druckserver nicht an der oberen Gehäuseabdeckung an. Die obere Gehäuseabdeckung ist nicht dafür
No levante nunca el servidor de impresión agarrándolo por el panel superior. El panel superior no soporta el peso
Nunca erga o servidor de impressão pelo painel superior. O painel superior não suporta o peso do sistema.
Til de afdrukserver nooit op door het bovenpaneel vast te nemen. Het bovenpaneel kan het gewicht van het
14

Advertisement

Table of Contents
loading

Table of Contents