Installing The Dimm Air Baffle - Avaya S8800 Maintaining

Replacing memory modules
11. Turn on the attached devices and the server.
When you install or remove memory modules, the server configuration information changes.
When you restart the server, if a monitor and keyboard are connected, the system displays a
message that indicates that the memory configuration has changed.
Related Links
Sequence for populating DIMM connectors

Installing the DIMM air baffle

About this task
You must install the DIMM air baffle after you install a memory module.
Caution:
For proper cooling and airflow, replace the air baffle before you turn on the server. Operating
the server with a missing air baffle might damage server components.
Important:
Always use an electrostatic-discharge wrist strap or other grounding system when you work
inside the server. For more information, see
Procedure
1. Align the DIMM air baffle with the DIMMs and the back of the fans. See the following figure.
Maintaining the Avaya S8800 2U Server for Message Networking
24
on page 18
Protecting against ESD damage
Comments? infodev@avaya.com
on page 10.
May 2014