Chapter 4 Maintenance / Faq - Roland Camm-1Pro Series User Manual

Chapter 4
Maintenance / FAQ
Maintenance ................................................................................74
Cleaning ....................................................................................74
Consumable Items .....................................................................75
How to Replace the Separating Knife........................................76
Self-test Operation Check .........................................................77
What to Do If ..... .........................................................................78
The Machine Doesn't Run. ........................................................78
Cut Lines Are Uneven or Not Cut Attractively. ...........................79
Uncut Areas Remain or the Material Is Not Cut.........................79
The Carrier Paper Is Cut ...........................................................80
The Material Rise Up During Cutting, and the Blade Scratches the
Material ......................................................................................80
The Start and End Points for Cutting Are Not Same .................80
Blank Areas Are Produced On the Material ...............................80
Flat Material Cannot be Set Up As "PIECE" (the length is not dis-
played) .......................................................................................81
The Material Slips Away From the Pinch Rollers During the Cutting
Process ......................................................................................81
A Message Appears ...................................................................82
Responding to an Error Message ..............................................82
4
73