Calling Up
Procedure
Press
.
Deleting Settings
You can delete the stored settings for cutting conditions, returning them to their factory defaults. Please note
that all user numbers from 1 to 8 are deleted. (This resets to their default values not only the memory settings,
but also all menu settings.)
Procedure
Press
to select the user number you want to
call up.
Press
to enable the setting.
The parameters set to the selected user number appear on the display.
Press
several times until the screen shown in the
figure appears.
Press
several times until the screen shown in the
figure appears.
Press
.
Press
several times until the screen shown in the
figure appears.
Press
.
Press
to enable the setting.
The screen shown in the figure appears.
The Memory Feature
63
3