Adjusting the Cutting Speed
Examine the results of the cutting test and adjust the cutting speed accordingly.
Procedure
Cutting-speed adjustment
Setting range: 1 to 85 cm/s
(settable in increments of 1 cm/s)
Incorrect cutting conditions may cause symptoms such as those described below.
Blade force
Cutting-speed
Press
to display the screen in the figure.
Press
Press
to enable the setting.
Too
The material peels during the cutting.
large
The blade requires frequency replacement.
Cutting extends through the base paper, and normal advancing of
the material becomes impossible.
The blade protector is damaged.
Too
Some parts of the material remain uncut.
small
Too
Uncut areas remain in places.
fast
The cut depth differs according to the location (nonuniform cut-
ting depth).
The material peels.
The cut shape is distorted.
Too
slow
Cutting takes a long time.
Installing a Blade / Adjustment of a Blade
to adjust the numerical value.
2
39