Display Menu Descriptions; How To Read This Chapter - Roland Camm-1 CX-24/12 User Manual

9 Display Menu Descriptions

9 Display Menu Descriptions

9-1 How to Read This Chapter

The explanations in this chapter use the following format.
FORCE |
This indicates the factory
default value.
This indicates the number
of steps required to set a
numerical value.
9-2 Display Menu Descriptions
SELECT |
* Only CX-24
SETUP |
Stored in Memory
< 50g>
Factry Default
Setting Range
Description
Stored in Memory
ROLL
Factry Default
Selection Choices
Description
Stored in Memory
<ON>
Selection Choices
Description
Yes
50 g
30 to 200 g
10 g
Steps
This sets the blade force used when
cutting material.
Perform a cutting test and set the
conditions to match the loaded material
and the installed cutter.
No
ROLL
ROLL, EDGE, PIECE
ROLL:
This performs cutting using roll material.
EDGE:
When using roll material, cutting is performed from the front-left edge of the
material.
* When the setting for [ROTATE] on the display menu is [ON], cutting is
performed from the front-right edge.
PIECE:
This performs cutting using standard-size material or piece material.
No
ON, OFF
When this is on, cutting data can be received and various menu settings can
be made.
42
This is the information
that appears on the
display.
When set to "Yes," the
setting values are stored
in memory even when the
power is switched off.
This indicates the range in
which settings can be
made, or the range of
selectable choices.
This section provides an
explanation of functions
and matters that require
caution.