The Memory Feature; About The Memory Feature; To Store In Memory - Roland Camm-1Pro Series User Manual

The Memory Feature

About the Memory Feature

When using the memory feature, 8 types of cutting conditions can be set and stored in accordance with the
tools and the material.
The stored settings can be called up easily by pressing

To Store in Memory

Procedure

Use the display menu to make the settings for cutting conditions matched to the tool
and material in use.
You can set the following five types of parameters.
3
 Blade force:
 Offset: Menu mode [OFFSET]
 Cutting speed:
 Cutting quality: Menu mode [QUALITY]
 Up speed: Menu mode [UP SPEED]




When you store to a user number, any cutting conditions already stored to the number are automatically up-
dated (overwritten) with the newly set parameters. If you want to keep the previous cutting conditions, store
them to a different number. You can store up to eight types of cutting conditions using the steps described
above.
62
Press several times until the screen shown in the
figure appears.
Press .
Press .
Press .
Press .
Press to select the user number for the condi-
tions you want to store in memory.
Press to enable the setting.
Press to go back to the screen shown in the figure.
.