Ordering Examples - Siemens SIMOTICS L-1FN3 Configuration Manual

2.5.1.5

Ordering examples

Ordering example of a peak or continuous load motor
If you have any questions on configuring, contact your local Siemens office.
Table 2- 10
Component
Primary section
Primary section precision cooler
Secondary sections
(length of the secondary section
track: 1,440 mm)
Secondary section cover (metal
band)
Heatsink profiles with plug-type
coupling
Combi distributor
Hall sensor box
(standard, straight cable outlet)
Ordering examples of heatsink profiles
In the following ordering examples, the article numbers of the heatsink profile in question is
provided directly in the drawings. If you have any questions on heatsink profiles, contact your
local Siemens office.
Ordering examples of heatsink profiles with a plug-type coupling and for connection to a
combi distributor with a plug-type coupling are shown below. The relevant article numbers for
the secondary section end pieces with combi distributors are also shown in the drawings,
e.g. 1FN3050-0TJ01-0AA0.
Figure 2-3
1FN3 linear motors
Configuration Manual, 10/2018, 6SN1197-0AB86-0BP2
Quantity
1
1
12
1
2
2
1
Heatsink profiles for secondary section track sizes 1FN3050-4SA00-0AA0,
1FN3100-4SA00-0AA01, 1FN3150-4SA00-0AA0
2.5 Selection and ordering data
Peak load motor
Article No.
1FN3150–3WC00–0BA1
1FN3150–3PK00–0AA0
1FN3150–4SA00–0AA0
1FN3150–0TB00–1BC0
1FN3002–0TK04–1BC0
1FN3150–0TJ01–0AA0
1FN3005–0PH00–0AA0
Description of the motor
Continuous load motor
Article No.
1FN3150–3NC70–0BA1
1FN3150–3PK10–0AA0
47