Properties and attributes of the sealants used:
● Viton: resistant to temperature and glycol
● Perbunan: up to water temperatures of 80 °C
● Ethylene-propylene: resistant to temperature and glycol
Note
Recommended manufacturers
You will find recommended manufacturers for the connecting parts for the cooling in the
appendix.
Mounting
The connection parts and components can generally be installed using standard tools.
Recess at the machine slides
If the connection assembly of the primary section in the traversing direction protrudes over
the primary section, a recess must be machined at the machine slides above the cooling
connections so that the connection components can be used. See figure below.
Figure 5-30
1FN3 linear motors
Configuration Manual, 10/2018, 6SN1197-0AB86-0BP2
Example of a cooling connection with a recess on the machine slides
Configuration
5.4 Mounting
159