Temp-F
Temp-S
TM
VDE
WMS
A.3
Environmental compatibility
A.3.1
Environmental compatibility during production
● The packaging material is made primarily from cardboard.
● Energy consumption during production was optimized.
● Production has low emission levels.
A.3.2
Disposal
Recycling and disposal
For environmentally-friendly recycling and disposal of your old device, please contact a
company certified for the disposal of waste electrical and electronic equipment, and dispose
of the old device as prescribed in the respective country of use.
1FN3 linear motors
Configuration Manual, 10/2018, 6SN1197-0AB86-0BP2
Circuit for monitoring the temperature the motor winding
Temperature monitoring circuit for switching off the drive at overtemperature
Terminal Module
Association of Electrical Engineering, Electronics and Information Technology
(in Germany)
Position measuring system; incl. WMS: incremental position measuring system;
abs. WMS: absolute position measuring system
Appendix
A.3 Environmental compatibility
589