Transporting; Ambient Conditions For Transportation - Siemens SIMOTICS L-1FN3 Configuration Manual

Preparation for use

7.1 Transporting

Note
Original packaging
Keep the packaging of components with permanent magnets where possible!
When reusing the original packaging do not cover safety instructions that are possibly
attached. When required, use transparent adhesive tape for the packaging.
7.1 Transporting
Note
UN number for permanent magnets
UN number 2807 is allocated to permit magnets as hazardous item.
When shipping products that contain permanent magnets by sea or road, no additional
packaging measures are required for protection against magnetic fields.
7.1.1

Ambient conditions for transportation

Based on DIN EN 60721-3-2 (for transportation)
Table 7- 1 Climatic ambient conditions
Lower air temperature limit:
Upper air temperature limit:
Lower relative humidity limit:
Upper relative humidity limit:
Rate of temperature fluctuations:
Condensation:
Formation of ice:
Transportation:
Transport is only permissible in locations that are fully protected against the weather (in halls or rooms).
474
- 5 °C (deviates from 3K3)
+ 40 °C
5%
85%
Max. 0.5 K/min
Not permissible
Not permissible
Class 2K2
Configuration Manual, 10/2018, 6SN1197-0AB86-0BP2
1FN3 linear motors