Motor Installation Procedures - Siemens SIMOTICS L-1FN3 Configuration Manual

Configuration
5.4 Mounting
Continuous load motor: Installation dimensions
Table 5- 4 Installation dimensions for installing the motor according to figure above
Installation dimen-
sion with precision
cooler and with
secondary section
cooler
1FN3..-xN h
M1
in mm
1FN3050 74.3
1FN3100
1FN3150 76.3
1FN3300 92.9
1FN3450 94.9
1FN3600 99.9
1FN3900 101.9
5.4.4.2

Motor installation procedures

There are three different procedures for installing a linear motor in a machine:
● Assembly with divided secondary section track
● Assembly by introducing the slide
● Assembly through the mounting of the motor components
Motor assembly with divided secondary section track
One prerequisite for this type of assembly is that the entire secondary section track can be
divided into two sections. In this case, the two sections must at least be as long as the slide.
Procedure
1. Mount the slide together with the linear guide and the primary section.
144
Installation dimen- Installation dimen-
sion with precision sion without preci-
cooler and without sion cooler and
secondary section without secondary
cooler section cooler
h h
M2 M3
in mm in mm
71.3 59.4
73.3 61.4
89.9 78
91.9 80
-- --
-- --
Installation dimen-
sion without preci-
sion cooler but with
secondary section
cooler
h
M4
in mm
62.4
64.4
81
83
88
90
Configuration Manual, 10/2018, 6SN1197-0AB86-0BP2
Tolerance of
the installa-
tion dimen-
sions
in mm
+0.3
+0.3
+0.3
+0.3
+0.3
+0.3
1FN3 linear motors