Installation Dimensions - Siemens SIMOTICS L-1FN3 Configuration Manual

9.2

Installation dimensions

Specifying the installation dimensions
No individual tolerances are specified for the primary section and the secondary section. The
tolerances for the primary and secondary sections are coordinated with the reference
installation height of the complete motor. You therefore only have to consider the tolerances
of the mounting height for the design.
You will find detailed data on the installation dimensions and tolerances in Chapter
"Mounting (Page 136)".
1FN3 linear motors
Configuration Manual, 10/2018, 6SN1197-0AB86-0BP2
Assembly drawings/dimension sheets
9.2 Installation dimensions
511