Siemens SIMOTICS L-1FN3 Configuration Manual page 150

Configuration
5.4 Mounting
2. Place the primary section with a forcing assembly on the secondary section track as
follows.
Danger of crushing when mounting the primary section on the secondary section!
When you are placing the primary section on the secondary section, there is a risk of
crushing due to the high forces of attraction.
• Never place the primary section directly onto the secondary section.
• Always place a distance foil manufactured out of non magnetizable material between
①
②
③
Figure 5-22
148
WARNING
the primary section and secondary section.
Forcing plate
Primary section
End support block
Forcing assembly
Configuration Manual, 10/2018, 6SN1197-0AB86-0BP2
1FN3 linear motors