Preparation For Use - Siemens SIMOTICS L-1FN3 Configuration Manual

Preparation for use

Risk of death and crushing as a result of permanent magnet fields
Severe injury and material damage can result if you do not take into consideration the
safety instructions relating to the permanent magnet fields of the secondary sections.
• Observe the information in Chapter "Danger from strong magnetic fields (Page 29)".
Incorrect packaging, storage and/or incorrect transport
Risk of death, injury and/or material damage can occur if the devices are packed, stored, or
transported incorrectly.
• Always follow the safety instructions for storage and transport.
• When transporting or lifting machines or machine parts with the motors installed, protect
• Always correctly and carefully carry out storage, transport and lifting operations.
• Only use suitable devices and equipment that are in perfect condition.
• Only use lifting devices, transport equipment and suspension equipment that comply
• IATA regulations must be observed when components are transported by air.
• Mark locations where secondary sections are stored with warning and prohibit signs
• Observe the warning instructions on the packaging.
• Always wear safety shoes and safety gloves.
• Take into account the maximum loads that personnel can lift and carry. The motors and
• Primary sections and secondary sections must always be transported and stored in the
1FN3 linear motors
Configuration Manual, 10/2018, 6SN1197-0AB86-0BP2
WARNING
WARNING
the components from moving unintentionally.
with the appropriate regulations.
according to the tables in Chapter "Supplied pictograms".
their components can weigh more than 13 kg.
packaged condition.
– Replace any defective packaging. Correct packaging offers protection against
sudden forces of attraction that can occur in the immediate vicinity of a secondary
section. Further, when correctly packaged, you are protected against hazardous
motion when storing and moving the secondary section.
– Only use undamaged original packaging.
7
473