Effect Run Mode Settings - 71 - Sony HDS-7100 User Manual

Effect Run Mode Settings – 71
Displaying the EFFECT RUN MODE menu
The system provides the following settings for effect execution
conditions.
• Loop: When the effect reaches the last keyframe, it
automatically returns to the first keyframe, and repeats the
effect according to the "Loop end time" setting.
• Loop end time: When looping effects in more than one channel,
select whether the loop timing should be aligned with the
longest effect, or independent for each channel.
• Run together: Ignores the current delegation, and runs the effect
on all channels simultaneously.
• Cross-point hold: An effect is executed ignoring the cross-point
information in the effect, and using cross-point selections
from before the effect execution.
• Default keyframe duration: S elects the duration given to all
newly-inserted keyframes.
The effect run mode settings use the EFFECT RUN MODE menu.
Use the following procedure to display the EFFECT RUN MODE
menu.
1
Display the first set of soft key indications in the EFFECT
UTILITY menu (a top menu).
71 72 73
EFF RUN REGISTER REGISTER
MODE NAME
EFFECT UTILITY menu soft key indications
2
Press F1 (EFF RUN MODE).
The EFFECT RUN MODE menu appears.
LOOP
LOOP END RUN
TIME TOGETHER
EFFECT RUN MODE menu soft key indications
The following are some of the operations carried out in this menu.
74 77
78
CHANNEL DISK COLOR
COPY
MATTE
XPOINT
HOLD
Chapter 7 Keyframe Effects
MORE
SNAP SHOT
DEFAULT XPOINT
KF DUR HOLD
7-29