Sony HDS-7100 User Manual page 220

Merging the contents of a specified register on the end of the
currently recalled register – F3 (MERGE)
4
Enter the number of the first destination register to which the
contents are to be copied using the numeric keypad, and press
the ENTER button. Alternatively, click on the register
number displayed on the screen, using the mouse.
The contents of the range of registers specified as source are
copied to the range of registers specified here.
Notes
• The previous contents of the destination registers are
destroyed by the copy operation.
• If a register is write-protected, a copy operation with this
register as the destination register is not carried out.
Use the following procedure.
1
Press F3 (MERGE).
The legend "MERGE" appears in the numeric keypad area.
2
Enter the number of the register whose contents are to be
appended to the contents of the currently recalled register
using the numeric keypad, and press the ENTER button.
Alternatively, click on the register number displayed on the
screen, using the mouse.
This merges the contents of the two registers in a temporary
register.
To store the merged contents of the two registers in the
currently recalled register, proceed to step 3.
3
Carry out one of the following operations.
• Press the STORE EFF button in the keyframe operation
section.
• Recall another register.
• Save to disk.
In this case the maximum number of keyframes that can be
written is 99.
Chapter 8 Effect Utilities
8-7