Sony HDS-7100 User Manual page 30

MOD (modify) button: Rewrites the
current keyframe to be the same as the
current state of the working keyframe
buffer. If the effect is currently
stopped between two keyframes, this
overwrites the immediately previous
keyframe.
BEFR/INSRT (before/insert) button:
Inserts the contents of the working
keyframe buffer as a new keyframe.
Pressing this button on its own inserts
the new keyframe after the current
keyframe, if the effect is currently
stopped on a keyframe.
Pressing this button while holding
down the SHIFT button 5 inserts the
new keyframe before the current
keyframe.
If the effect is stopped between
keyframes, the new keyframe is
inserted at the current position.
8 Floppy disk drive
This accepts a 3.5-inch floppy disk for
loading or saving the contents of registers.
It is also used when upgrading the system
to load new software from disk into the
flash memory.
The indicator below and to the left of the
floppy disk drive lights during a disk
access.
Chapter 2 Location and Function of Parts
2-9