Sony HDS-7100 User Manual page 195

Generating and Editing Keyframes
Amending a keyframe
Amending a number of keyframes together
7-12
Chapter 7 Keyframe Effects
Use the following procedure to amend an already created
keyframe.
1
Select the active channels and the reference channel.
2
Stop the effect on the required edit point.
When the edit point is on a keyframe, that keyframe will be
amended. If the edit point is intermediate between two
keyframes, the immediately previous keyframe will be
amended.
3
Press the KF EDIT ENABL button, turning it on.
4
Amend the keyframe.
5
Press the MOD button.
This carries out the amendment.
To carry out the same amendment to all keyframes in a specified
range, use the following procedure.
When more than one channel is active, the amendment is carried
out based on the specification for the reference channel.
1
Select the active channels and the reference channel.
2
Stop the effect on or after the first keyframe in the range to be
amended.
This operation is not necessary if you are going to specify the
starting keyframe by number, or if you wish to amend all
keyframes.
3
Press the KF EDIT ENABL button, turning it on.
4
Amend the keyframe.
5
Press the MOD ALL button.
The MOD ALL button lights green.