Applying a wedge blind effect – F1 (BLIND) and F2 (MODE)
Use the following procedure.
1
Press F1 (BLIND), turning it on.
2
Press F2 (MODE) to select "WEDGE".
3
Adjust the parameters for the following items.
Item
Setting
"Transition"
Select the
transition type.
"Partition"
Select the way in
which the wedges
are divided.
"Position"
Set the position of
the center of the
rotation.
Knob adjustments of parameters
Left ("Rot"): number of rotations of
pieces (–8 to +8)
Center ("Pers"): degree of
perspective (0 to 100%)
Left knob ("No."): width of individual
wedges (0 to 100%)
Center knob ("Phas"): position of
divisions (–4 to +4)
Left knob ("X"): x-coordinate
(–4 to +4)
Center knob ("Y"): y-coordinate
(–3 to +3)
Chapter 5 Special Effects Operations
5-85