Sony HDS-7100 User Manual page 172

Changing the vertical direction of melting – F4 (DIRECTION)
Breaking the melting part of the image into pixels – F5 (PIXEL)
Press F4 (DIRECTION) to toggle the direction of melting
vertically.
Use the following procedure.
1
Press F5 (PIXEL), turning it on.
2
Adjust the "PIXEL" parameters.
• Left knob ("Dens"): degree to which portion of image to
which melting effect is applied disappears (0 to 100%)
• Center knob ("Rndm"): degree to which pixel position
becomes more randomized further from the center (0 to
100%)
Chapter 5 Special Effects Operations
5-91