Sony HDS-7100 User Manual page 171

Nonlinear Effects
Applying the melting effect – F1 (MELT)
Selecting the shape of the portion beginning to melt – F2
(PATTERN)
Moving the waves at the melting boundary – F3 (LOCK)
5-90
Chapter 5 Special Effects Operations
Use the following procedure.
1
Press F1 (MELT), turning it on.
2
Set the "Transition" parameters.
• Left knob ("Trns"): degree of transition (0 to 100%)
• Center knob ("Curv"): degree of stretching the image (0 to
100%)
• Right knob ("Rndm"): degree to which the melted portion is
jagged (0 to 100%)
Use the following procedure.
1
Press F2 (PATTERN), turning it on.
2
Adjust the parameters for the following items.
Item Setting
"Border" Select the shape
of the portion
beginning to melt.
"Slant angle" Set the angle of
the boundary.
Use the following procedure.
1
Press F3 (LOCK), turning it off.
2
Adjust the "Border" parameter.
• Right knob ("Sped"): direction and speed of wave
movement (–100 to +100%)
Knob adjustments of parameters
Left ("Amp"): size of the waves (0 to
100%)
Center ("Freq"): degree of fineness of
the waves (0 to 100%)
Right ("Ofst"): phase offset of the
waves (–16 to +16)
Right knob ("Angl"): boundary angle
(–100 to +100%)