Sony HDS-7100 User Manual page 229

Disk Utilities
8-16
Chapter 8 Effect Utilities
3
Use F3 (J ) or F4 (j ) to display the required register number
in green, and then press F5 (SELECT). Alternatively, click on
the register number displayed on the screen, using the mouse.
To specify all registers, press F6 (ALL).
A blue bar appears attached to the register number. Repeat
step 3 as necessary, if you wish to save more than one file.
4
Press F8 (OK).
5
Use the numeric keypad to enter the file number for the first
register in the range, and then press the ENTER button.
To save with the file numbers the same as the register
numbers, press the ENTER button without entering a number.
Register numbers are in the range 1 to 99, but file numbers are
in the range 1 to 999.
If the file with the specified file number already exists, the
following message appears. Select one response and click on
it (or press the button indicated in parenthesis).
Do you want to overwrite?
OK (TRIM): Overwrite the file, and continue processing.
ALL OK (ENTER): Unconditionally overwrite all of the
specified files.
SKIP (j ): Do not overwrite this file, but continue
processing.
CANCEL (EXIT): Cancel the saving operation.
This saves the register or registers.
You can abort the save by pressing F7 (CANCEL) before
pressing ENTER button.