Three-Dimensional Transformation Status - Sony HDS-7100 User Manual

Three-Dimensional Transformation Status

Display – 601
Selecting image spin
This displays the current state of the three-dimensional
transformation parameters.
In the STATUS menu, press F1 (TRANSFORM) to show the 3D
TRANSFORM display.
601 3D TRANSFORM
TRANSFORM
SIZE
–
LOCATION 0.0000
AXIS LOC 0.0000
ROTATION 0.0000
SKEW/ASPECT 0.0000
PERSPECTIVE 0.0000
TRGT LOC/SIZE 0.0000
TRGT SPIN 0.0000
SRCE SPIN 0.0000
3D TRANSFORM display
The 3D TRANSFORM display shows the current state of the
three-dimensional transformation parameters.
The following procedure is also possible.
When rotating a video image between keyframes, the normal
rotation function only allows a maximum of one turn between
keyframes, and as a result the image may not rotate in the required
manner. Using the spin function, on the other hand, you can create
effects in which the image rotates continuously about the specified
axis.
1
Press F7 (SPIN), turning it on.
The buttons (LOC SIZE, AXIS LOC, etc.) in the transform
mode selection section of the control panel all go off.
2
Press the TRGT button or SRCE button, turning it on, to select
the target or source coordinate space.
3
To cause a spin about the x- or y-axis, turn the trackball. To
cause a spin about the z-axis, turn the Z-ring.
The image spins as you turn the trackball or Z-ring.
X Y Z
– 1.0000
0.0000 0.0000
0.0000 0.0000
0.0000 0.0000
0.0000 1.0000
0.0000 0.0600
0.0000 1.0000
0.0000 0.0000
0.0000 0.0000
AUTO
CUBE
Chapter 9 Status Displays
E G 1 2 R
602
SPIN 3D
VIEWER
9-3