Sony HDS-7100 User Manual page 71

Setting coordinate values
Above the soft key indications are displayed the three-dimensional
coordinate values for the reference channel selected in the active
window.
Selected path type
TRGT LOC XYZ
Selected mode
Selected coordinate frame (SRCE/TRGT)
To change a coordinate value, either carry out a transformation
using the trackball and Z-ring, or press one of the X, Y and Z
buttons, and enter the value from the numeric keypad.
For details see Chapter 3 "Three-Dimensional Transformations".
X 12.1116 Y 1.0002
x-, y- and
z-coordinate values
Chapter 4 Menu Operations
Z –90.1118
4-7