Sony HDS-7100 User Manual page 104

Strobing on each keyframe – F4 (KF STROBE)
Obtaining an impression of film frame flicker – F5 (FILM)
Selecting the video freeze timing – F6 (VIDEO TIMING)
Selecting the keyframe freeze timing – F7 (KEY TIMING)
Selecting which signals are frozen – F8 (DELEGATION)
Press F4 (KF STROBE), turning it on.
This freezes the input video on each keyframe of the effect.
Use the following procedure.
1
Press F5 (FILM), turning it on.
2
Turn the left knob ("Film") to adjust the degree of film frame
flicker (0 to 100%).
Press F6 (VIDEO TIMING), to cycle through the following
possibilities.
Frame: freeze a frame.
Field 1: freeze the first field of a frame.
Field 2: freeze the second field of a frame.
Press F7 (KEY TIMING) to cycle through the possibilities:
"Frame", "Field 1", or "Field 2".
The freeze function can apply to the video signal, or to the key
signal, or to both.
Press F8 (DELEGATION) to cycle through the following
possibilities:
Video & Key:
Video: Apply to the video image only. The key image is
unaffected.
Key: Apply to the key image only. The video image is
unaffected.
Apply to the video and key images simultaneously.
Chapter 5 Special Effects Operations
5-23