Sony HDS-7100 User Manual page 197

Generating and Editing Keyframes
Deleting keyframes
7-14
Chapter 7 Keyframe Effects
Normally, regardless of the position of the edit point, when you
delete a keyframe the total duration of the effect changes. If you
do not wish the deletion to change the total duration of the effect,
first press the CNST DUR button in the duration setting section,
turning it on.
Use the following procedure to delete a keyframe (or keyframes).
1
Select the active channels and the reference channel.
2
Stop the effect on the required edit point.
This operation is not necessary if you are going to specify a
range of keyframes to delete.
When the edit point is on a keyframe, that keyframe will be
deleted. If the edit point is intermediate between two
keyframes, the immediately previous keyframe will be
deleted.
3
Press the KF EDIT ENABL button, turning it on.
4
To delete more than one keyframe, use either of the following
methods to specify the range to be deleted.
• To specify the range by keyframe numbers, press the MOD
ALL button, input the starting keyframe number, press the
ENTER button, input the ending keyframe number, and press
the ENTER button.
• To delete all keyframes from a specified keyframe to the end
of the effect, press the MOD ALL button, input the starting
keyframe number, press the ENTER button, enter a period
".", and press the ENTER button.
5
Press the DEL button.
This carries out the deletion.