Sony HDS-7100 User Manual page 283

Settings Related to Operation 2 – 707
Making it possible to access frequently used menus directly
from the "TOP MENU LIST" screen – F3 (PAGE 0 F-KEY)
Disabling the effect register auto save function – F4 (EFFECT
REGISTER AUTO SAVE)
Toggling the power-on resume mode – F5 (RESUME CONTROL
PANEL)
Toggling the internal key frame processing mode – F6 (KF
INTERPOLATE)
10-20
Chapter 10 Setup Operations
Pressing F3 (PAGE 0 F-KEY) to select "Useful Function" causes
the titles of the following eight menus to be displayed in the
function key indications for the "TOP MENU LIST" screen (see
page 4-8).
In the "TOP MENU LIST" screen, selecting a soft key allows a
direct call to the corresponding menu.
11 12 13
BKGD BORDER CROP
Enable or disable the auto save function, which automatically
saves the current editing contents of the key frame effect register
whenever the register is called.
Enable: Use the auto save function.
Disable: Do not use the auto save function.
When set to Disable, a manual operation is required to save the
effect that you are currently editing before calling the key frame
effect register.
Set F5 (RESUME CONTROL PANEL) to On to use the resume
function. When the system is powered on, the resume function
restores it to the state it was in immediately before being powered
off.
Select whether internal processing of key frames should be carried
out on a field or frame basis.
FIELD: Perform processing for each field.
FRAME: Perform processing for the first field only, and use the
processing results of the first field for the second field.
72 75 601
REGISTER SNAPSHOT TRANS-
FORM
602 610
3D TIME
VIEWER LINE