Sony HDS-7100 User Manual page 277

Setting Up the GPI – 704
10-14
Chapter 10 Setup Operations
High Active: When the GPI input is high level, switch to the
operating mode specified as "ACTION". Effective only
when "ACTION" is "4:3" or "16:9".
Low Active: When the GPI input is low level, switch to the
operating mode specified as "ACTION". Effective only
when "ACTION" is "4:3" or "16:9".
Off: No operation.
3
Press F3 (ACTION PREVIUS) or F4 (ACTION NEXT) to
select the trigger action.
Pressing F4 (ACTION NEXT) cycles forward through the
possibilities under the heading "ACTION LIST" on the right,
and pressing F3 (ACTION PREVIUS) cycles through in the
reverse sequence.
NOP: Ignore incoming GPI signals.
Recall EFF #: Recall a key frame effect.
Run: Execute a keyframe effect.
Stop: Stop a keyframe effect.
Rewind: Rewind a keyframe effect.
Freeze: Freeze the input signal to the DME.
Fwd jitter: Each time the GPI signal is input, move forward
one frame, and jitter, that is, display fields 1 and 2
alternately.
Rewind jitter: Rewind keyframe effect, and jitter, that is,
display fields 1 and 2 alternately.
+1 Frame: Move a stopped keyframe effect forward by one
frame.
–1 Frame: Move a stopped keyframe effect back by one
frame.
+1 Field: Move a stopped keyframe effect forward by one
field.
–1 Field: Move a stopped keyframe effect back by one field.
4:3: Select a screen aspect ratio of 4:3
16:9: Select a screen aspect ratio of 16:9
4
If you selected "Recall EFF #" in step 3, press F7 (EFFECT
NUMBER), and enter the number of the effect from the
numeric keypad.