Sony HDS-7100 User Manual page 90

Creating the back surfaces
Moving and rotating the slab
2
Make the following size and position settings to create the side
surface (3.00 × 4.00) on channel 2.
• Size settings
Crop Left: –1.50 (
Crop Right: +1.50
Crop Top: +2.00 (
Crop Bottom: –2.00
• Position settings
Rotation X: 0.250
Rotation Y: 0.000
Source Location Z: –3.000 (
3
Make the following size and position settings to create the
upper surface (6.00 × 3.00) on channel 3.
• Size settings
Crop Left: –3.00 (
Crop Right: +3.00
Crop Top: +1.50 (
Crop Bottom: –1.50
• Position settings
Rotation X: 0.000
Rotation Y: 0.250
Source location Z: –2.000 (
Use the same procedure as for the cube (see page 5-7).
Use the same procedure as for the cube (see page 5-7).
1
/ depth)
2
1 / height)
2
1
/ width)
2
1
/ width)
2
1 / depth)
2
1
/ height)
2
Chapter 5 Special Effects Operations
5-9