Sony HDS-7100 User Manual page 262

Setting a delay – F4 (DELAY)
This sets a delay from the time at which you carry out the effect
execution operation to the time at which the execution actually
starts.
Use the following procedure.
1
Select the channel or channels to which the setting is to apply.
2
Press F4 (DELAY).
3
Enter the delay value (seconds.frames) from the numeric
keypad, and press the ENTER button.
This sets the entered value as the delay.
Copying a keyframe – F5 (COPY TO PASTE BUFFER)
and F6 (PASTE AFTER)
These copy a keyframe from one position to another.
Use the following procedure.
1
Select the channel to which the operation is to apply.
2
Stop the effect on the source keyframe to be copied.
3
Press F5 (COPY TO PASTE BUFFER).
4
Stop the effect at the position to which you wish to copy the
keyframe.
5
Press F6 (PASTE AFTER).
This copies the keyframe.
Chapter 9 Status Displays
9-11