4
Setup
(1) Inspection on wiring
• Miswiring ? (Especially power input and motor output)
• Short or grounded ?
• Loose connection ?
(2) Confirmation of power supply and voltage
• Rated voltage ?
电 源
(3) Fixing of the servo motor
• Unstable mounting ?
(4) Separation from the
mechanical system
(5) Release of the brake
Machine
(6) Turn to Servo-OFF after finishing the trial run by pressing
Note
• Wiring details please refer to P.2-12 ~ "Overall Wiring/ Wiring of the Main Circuit/ Wiring
Diagram".
•The drive in the diagram is a multi - functional.
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
4-86
2.Trial Run (JOG run)
Inspection Before Trial Run
Motor
Display LED
ground
Connector X6