Setup Of Front Panel Lock - Panasonic MINAS A6 Series Operating Instructions Manual

2
Preparation
Outline
To prevent operational error e.g. unintentional parameter modification, the front panel
may be locked.
Once locked, operations on the panel are limited as follows:
Monitor Mode
Parameter Set up Mode
EEPROM Writing Mode
Auxiliary Function Mode
How to operate
• Related parameters
Parameter No.
Class
5
Lock and unlock can be made in one of two ways.
Procedure
Lock
Unlock
Note
For details of front panel lock release, refer to P.2-105.
Related page
P.4-6 to P.4-85
•
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
2-78
14. How to Use the Front Panel

Setup of front panel lock

Mode
No limitation: all monitored data can be checked.
No parameter can be changed but setting can be checked.
Cannot be run. (No display)
Cannot be run except for "Release of front panel lock". (No
display)
Title
No.
35 Setup of front panel lock
Front panel
(1) Set Pr5.35 "Front panel lock" to 1, and writ the setting to EEPROM.
(2) Turn on power to the driver.
(3) The front panel is locked.
(1) Execute the auxiliary function
mode, front panel lock release
function.
(2) Turn on power to the driver.
(3) The front panel is unlocked.
"Details of Parameter"
Locked panel conditions
Function
Locks the operation attempted from the front
panel.
Setup support software
PANATERM
(1) Set Pr5.35 "Front panel lock" to 0,
and writ the setting to EEPROM.
(2) Turn on power to the driver.
(3) The front panel is unlocked.